China SUNERGY

Home

Press

About China Sunergy

Products

P Type Solar Cells

• Mono Solar Cells

• Multi Solar Cells

• CSUN-M156-
Dia219-BB2

• CSUN-M156-
Dia219-BB3

Thea Solar Cell

	CSUN-M156-Dia219-BB2

TYPE OF CELL	a(mn)	b(mn)	c(mn)	d(mn)	e(mn)	f(mn)	g(mn)	h(mn)	i(mn)
CSUN-M156-Dia219-BB2	156.0±0.50	78.0±0.05	39.0±0.50	1.80±0.25	1.80±0.05	1.0±0.25	3.30±0.05	219.0±1.0	4.90±0.50
comments： a---Side length of the cell; b---Center to center space for front busbars(backside electrodes); c---Space from front busbars(backside electrode)centers to cell edge; d---Space from front silver line edge to cell edge; e---Width of front busbars width; f---Space from Al edge to cell edge; g---Width of backside electrode width; h---Diagonal length of the cell; i---Space from backside electrode end to cell edge

Electric characteristics
Standard test conditions(STC)
Light intensity:Standard intensity 1000 W/m2
Spectrum:AM1.5 spectrum
Temperature:25℃
Measurement method:IEC904-1

CSUN-M156-Dia219-BB2	Eff(%)	Pm(Wp)	Vap(V)	lap(A)	Voc^*(V)	lsc^*(A)
CSUN-M156-Dia219-BB2/1750	17.50	4.26	0.500	8.52	0.62	8.98
CSUN-M156-Dia219-BB2/1725	17.25	4.20	0.500	8.40	0.62	8.86
CSUN-M156-Dia219-BB2/1700	17.00	4.14	0.500	8.27	0.62	8.73
CSUN-M156-Dia219-BB2/1675	16.75	4.08	0.500	8.15	0.62	8.60
CSUN-M156-Dia219-BB2/1650	16.50	4.02	0.500	8.03	0.62	8.48
CSUN-M156-Dia219-BB2/1625	16.25	3.95	0.500	7.91	0.61	8.46
CSUN-M156-Dia219-BB2/1600	16.00	3.89	0.500	7.79	0.61	8.34
CSUN-M156-Dia219-BB2/1575	15.75	3.83	0.500	7.67	0.61	8.21
CSUN-M156-Dia219-BB2/1550	15.50	3.77	0.500	7.54	0.61	8.08
CSUN-M156-Dia219-BB2/1525	15.25	3.71	0.500	7.42	0.61	7.95
CSUN-M156-Dia219-BB2/1500	15.00	3.65	0.500	7.30	0.61	7.82
CSUN-M156-Dia219-BB2/1475	14.75	3.59	0.500	7.18	0.61	7.69
CSUN-M156-Dia219-BB2/1450	14.50	3.53	0.500	7.06	0.60	7.69
CSUN-M156-Dia219-BB2/1425	4.25	3.47	0.500	6.94	0.60	7.56
CSUN-M156-Dia219-BB2/1400	14.00	3.41	0.500	6.81	0.60	7.43
CSUN-M156-Dia219-BB2/1300	13.00	3.16	0.500	6.69	0.60	6.88
CSUN-M156-Dia219-BB2/1200	12.00	2.92	0.500	6.57	0.60	6.36

Note:Test condition are STC;Test method according to IEC904-1;Tolerance Efficiency 5% rel;Classify cells with the lap at the constant Uap=0.515v
*These column gives typical value of production performance,Just for reference

Site Map | Contact Us